/* INSTALL.TXT **************************************************************

                          INSTALLATION INSTRUCTIONS

                   memory access driver for Group3 Control

            for Group3 ISA bus Loop Controller Cards (LC1 and LC3)

                        running under Windows 95/98/ME

*****************************************************************************

Files:
  The ISA 95/98/ME installation contains the following files:
    INSTALL.TXT             this file
    PP_32.DLL               for program access to driver
    PP_95.DLL               for program access to driver
    VSS_PP.VXD              Windows 95/98/ME run-time driver

BOARD Identification:
  The Group3 PCI and ISA loop controller cards are easily distinguishable:
    PCI loop controller card:
      Each card has a rotary switch on the top edge of the circuit board.
      Each card has six circular holes on the rear metal bracket.
    ISA loop controller card:
      Each card has a set of jumpers on the circuit board.
      Each card has one or three elliptical hole on the rear metal bracket.

*****************************************************************************

    For information on installing Group3 ISA bus Loop Controllers refer to
    the README.TXT file on this disk.

Installation:
 1. Copy the files PP_32.DLL, PP_95.DLL, and VSS_PP.VXD from the floppy
    drive (ISA_9X directory) to the \WINDOWS\SYSTEM directory on the hard
    drive.

Verification:
 1. Run the program "LC_FIND.EXE" on the floppy disk.  It will display
    a list of loop controllers installed in the computer using the installed
    drivers.

Removal:
 1. Delete the files installed in 1 above.

*****************************************************************************/
